Installing and using DVDFab 12 Blu-ray Copy


DVDFab Blu-ray copy app with copy protection removal function

DVDFab Blu-ray Copy Is a Chinese software vendor DVDFab SoftwareIt is a Blu-ray copy software developed by (formerly Fengtao Software) that can remove copy protection, and can also compress (transcode) BD-R DL to BD -R.

DVDFab Blu-ray Copy is fully functional during the trial period (30 days) or within the trial limit (3 sheets), and can be used free of charge if either the trial period or the trial limit is exceeded. DVDFab HD Decrypter Automatically migrate to.
Free version restrictions

-Latest protection technology is not supported (AACS MKB version 36 and above are not supported)
・ Only full disc and main movie can be used
-Compression (transcoding) is not supported
・ North American Blu-ray is not supported
-Writing to a Blu-ray blank disc is not possible (possible with ImgBurn setup)
-ISO image file output is not possible (possible with ImgBurn setup)

See below for Blu-ray copying and ripping

Basic knowledge of Blu-ray copying and ripping

About Blu-ray standards and ripping apps Rip is used synonymously with copy, backup, and dubbing by importing video and audio data from an optical disc into a computer using dedicated software, but the app is a copy […].


Using this application to remove disk protection will violate copyright laws. Avoiding technical safeguards Conflict with.
Copyright law and illegal activities

System requirements

Version 12. 0 Currently

OS: Windows 7/8/10/11
CPU: Intel Core 2 Quad compatible or better
RAM: 2 GB or more
HDD: 100 GB or more free space
GPU: NVidia GeForce GTX 260 compatible or better

Blu-ray drive

Where to get the software

DVDFab official download page

Install DVDFab 12 Blu-ray Copy

DVDFab Blu-ray Copy DVDFab 12 Because it is a module ofDVDFab 12 All-in-one To install.

See below for installation instructions

Installing and using DVDFab All-in-One

DVDFab's strongest ripping / copying app with DVD / Blu-ray deprotection function DVDFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengtao […]]


Protection technology that embeds a watermark (digital watermark) in voice Cinavia Audio tracks protected by DVDFab Blu-ray Cinavia RemovalWithout it, the protection cannot be released.


Installing and using DVDFab Cinavia Removal

Module to remove copy guard Cinavia contained in audio DVD Fab Cinavia Removal is a Chinese software vendor DVDFab Software (formerly Fengtao Software) […]

DVDFab Cinavia Removal can remove not all Cinavia, only titles supported by DVDFab Cinavia.

DVDFab Cinavia Removal-001

DVDFab Cinavia Removal When Cinavia is detected that can be removed by, the information of the audio track protected by Cinavia is displayed.

DVDFab Cinavia Removal-005

This disc is Cinavia protected.The backed up disc cannot be played on a player like the PS3.Play the playback device on a device that does not detect Cinavia.Is displayed, Cinavia cannot be removed.

Meta information settings

By default, DVDFab is set to match the disc title information against the DVDFab server and download the relevant metadata.


After adding metadata, the media server app will display meta information such as cover art and performers.


If you don't need the meta information  Common setting  Of General から メ タ Select I want to use meta information Uncheck.

How to use DVDFab 12 Blu-ray Copy

DVDFab Blu-ray Copy From the home screenCopy  Select and use.

Insert the disc into the drive after starting DVDFab, or eject the tray when DVDFab starts.


In the tools menu Copy Select and top left Copy mode After specifying the mode to use in, insert the disc into the drive or drag the ISO file to DVDFab to start parsing the disc.

Disc analysis is interrupted when an unsupported disc is inserted in the free version.

DVD converter -Blu-ray conversion-UHD Blu-ray conversion Is a separate module and cannot be used when the trial limit is reached.


When the disc is recognized, information such as title, data size, audio, and subtitles is displayed.


The loaded source is task It is added as, and you can enable / disable the task with the button on the far right.

The task becomes invalid when the menu is switched or the output process is completed.
Meta information

If the cover art is not displayed or a different cover art is displayed in the environment where the use of meta information is enabled, correct it.


Click "Search Movies / TV Shows" to make corrections.


Disc type After selecting the content type with, title Enter the title in the item of Years Leaves blank Search Products Click, select the relevant title from the search results, click "Confirm", and meta information such as cover art will be displayed, so reflect it in "Output".

Copy guard information

The type of copy guard used for the disc is displayed under the title. 情报 Can be confirmed.


AACS protection is removed If there is a notation, copy the disc and the copyright law Avoiding technical safeguards Conflict with.

Copy mode selection

In copy mode Full disk-Main movie -segmentation-Combine-Customization-clone There are three types of full-disc main movie clones that are used for normal copying.

The free version is Full diskMain movieOnly available.
Full disk
Copy the entire contents of the disc and write it to a blank disc, or output it as an ISO image file or BD folder.
Main movie
Only the main part is copied, excluding the menus and bonus videos recorded on the disc.
You can freely set the output without the restrictions on full discs and main movies.
Clone / writing
A lossless copy that produces exactly the same as the source, supporting direct writing to blank discs or output to an ISO file.
Only available for DVD copy.
Multiple discs can be combined into a single disc and automatically transcoded if the source data size is larger than the target disc size.
clone Copy the contents of the disk unchangedFull diskCan compress (transcode) BD50 to BD25, operate menus, and change volume labels.
Main movie

The main movie is Main story Is automatically selected,If there is no Japanese in the audio or subtitles If you want to output a title other than the main part, such as a bonus video or a bonus video, change the selected title.


To change the output title Select another title open.


Check the title to be output.

Blu-ray containing multiple languages ​​will be selected as the title Japanese (JA) May not be included, soCheck the titles that include Japanese subtitles, referring to the playback time of the main content..
You cannot select multiple contents.
Chapter selection

Main movie -Customization-Combine In this mode, you can specify the chapters to record.


If you want to output only any chapter, specify the chapter range after setting the title.

Transcoding (compression)

Transcoding is the process of adjusting the video bit rate to the target size, and the higher the compression ratio, the more likely it is that block noise will occur in situations where image quality deteriorates or there is a lot of movement.

BD 25: Single-sided single-layer BD -R (1 GB)
BD 50: Single-sided dual-layer BD -R DL (2 GB)
When outputting a BD 50 on a BD 25, you can reduce the deterioration of image quality by adjusting the compression rate to a low level by selecting subtitles or audio in the main movie.


The copy settings of the loaded Blu-ray are displayed under the title,to BD 25 1080p Is transcoded (compressed) to fit on a single-sided, single-layer, 1 GB BD25 The compression size and compression ratio are displayed to the right of.


When writing to a single-sided dual-layer 2 GB BD-R DL, use the list of disk sizes. BD 50 choose.

Make sure that the source and output files are the same size (100%) because the compression feature is not available in the free version.

Subtitles / audio

In the main movie, customize, split, and combine modes, you can select the audio / subtitles to record.


"▶" in front of the check box is the default audio, so specify it in consideration of the combination with subtitles.

To change it, click the beginning of the audio / subtitle specified as the default.

Advanced Setting

Volume label and menu operations Advanced Setting Can be set with.


The volume label is the name given to the media, not the file name, and only half-width alphanumeric characters are used because it may be garbled.


Tasks are added automatically, and those that were interrupted due to an error may be registered, so before executing output processing Current task To confirm.


The number of tasks to perform Task list Since it is displayed in, click the task list if unnecessary tasks have been added.


If unnecessary tasks are registered, enable the check box and click "Delete".


The deleted task is Garbage can Click to display the list in the lower pane, and click the arrow at the right end of the task to restore it.


Archive Tasks that failed to be processed are automatically added to, so select them if you do not need them and click "Delete".

If the task processing fails and the task is saved in the archive, DVDFab will ask you to execute the incomplete task when you start it. If you cancel it, it will be automatically deleted from the task archive.

Write to blank disc

When writing to a disc, DVDFab saves the data in a temporary folder and writes the saved data using the writing function.

The free version does not support writing to blank discs.


Output destination After specifying the optical drive from the list and setting the number of copies, click "Start".

If no metadata has been added, a dialog will be displayed on output, but you can continue with "Cancel".


When the copy process is complete, the drive tray opens automatically and a dialog is displayed asking you to insert a blank disc.

Output of ISO image file / BD folder

If you want to save the data in an ISO file or BD folder Output destination To the right of ISO image file or sending us a message on folder Select the output format with the icon and specify the save destination.

The free version does not support output to an ISO file.


Click the save format icon, specify the save location, and then click "Start".

DVDFab Mini

DVDFab Mini The additional function has been removed CopyRipping An app that specializes in.


Since the explanation is displayed at startup Do not redisplayCheck the box and click "OK".


What can be used with Blu-ray copy Copy Only after selecting the copy mode from full disk / main movie and deciding the output size Destination You can copy the DVD by specifying and clicking "Start".

How to buy a DVDFab Blu-ray copy

DVDFab Blu-ray Copy has no license expiration date and can be permanently updated Indefinite edition And the license has an expiration dateSubscription version Is provided and the subscription version will be automatically renewed Cancellation procedureIf you do not, you will be billed regularly.

DVDFab Blu-ray Copy Purchase Page


To purchase a license, go to "Buy Now" on the product page.


Click "Buy Now" in the plan you want to purchase to proceed with the purchase procedure.

The indefinite version may be on sale Campaign page confirm.
After paying with a credit card, register as a member of DVDFab and activate the product with the registered email address and password.
Latest sale information and purchasing method ・ Cancellation of subscriptionSee the page below

DVDFab Sale Info Latest Sale Information and How to Buy

DVDFab sale information and purchase procedure ・ Introducing license registration method DVDFab can remove the copy guard developed by DVDFab Software (formerly Fengtao Software) in China […]

Related article


Install and use StreamFab for Android

Download Amazon Prime Video and Netflix content on your Android device StreamFab for Android is a Chinese software vendor DVDFab Software (formerly […]


Install and use StreamFab All-in-One

Download videos from video streaming services and video sites StreamFab All-in-One was developed by Chinese software vendor DVDFab Software (formerly Fengtao Software) […]


DVDFab Sale Info Latest Sale Information and How to Buy

DVDFab sale information and purchase procedure ・ Introducing license registration method DVDFab can remove the copy guard developed by DVDFab Software (formerly Fengtao Software) in China […]


Installing and using DVDFab Passkey for DVD / Blu-ray

DVDFab PassKey, a DVD/Blu-ray protection removal tool for DVDFab that also supports CPRM, is a copy guard developed by Chinese software vendor Fengtao Software […]


Installing and using DVDFab All-in-One

DVDFab's strongest ripping / copying app with DVD / Blu-ray deprotection function DVDFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengtao […]]