DVDFab's DVD copy app with copy protection removal
DVDFab DVD copyIs a Chinese software vendor DVDFab SoftwareA DVD copy software developed by (formerly Fengtao Software) that can remove copy protection, and compresses (transcodes) the data recorded on DVD-DL (DVD 9) to DVD-R (DVD 5). You can also copy it.
Free version restrictions
・ Some adult DVDs cannot be copied
-Fake vts protection protected DVDs cannot be copied
・ The latest copy guard release is not supported
・ Only full disc and main movie can be used
・ Output range cannot be specified by chapter
-Compression (transcoding) is not supported
-ISO image file output is not possible (possible with ImgBurn setup)
-Writing to a DVD blank disc is not possible (possible with ImgBurn setup)
See below for DVD copying and ripping
Basic knowledge of DVD copying and ripping
Basic knowledge required for copy / ripping such as DVD standards, media types, copy guards, etc. For ripping, copy / backup / dubbing […] by importing the video / audio data of the disc into a personal computer using dedicated software.
Illegality
Using this application to remove disk protection will violate copyright laws. Avoiding technical safeguards Conflict with.
Copyright law and illegal activities
System requirements
Version 12. 0 Currently
OS: Windows 7/8/10/11
CPU: Pentium II 500 MHz
RAM: 512 MB
Storage: 20 GB or more free space
Where to get the software
DVDFab 12 DVD Copy Installation
DVDFab DVD Copy DVDFab 12 Because it is a module ofDVDFab 12 All-in-one To install.
See below for installation instructions
Installing and using DVDFab All-in-One
DVDFab's strongest ripping / copying app with DVD / Blu-ray deprotection function DVDFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengtao […]]
Meta information settings
By default, DVDFab is set to match the disc title information against the DVDFab server and download the relevant metadata.
After adding metadata, the media server app will display meta information such as cover art and performers.
The meta information supports Japanese, but some titles may be in Chinese, and the titles are displayed in Chinese when played on the media player.
If you don't need the meta information Common setting Of General から メ タ Select I want to use meta information Uncheck.
How to use DVDFab 12 DVD Copy
DVDFab DVD copy From the home screenCopy Select and use.
In the tools menu Copy Select and top left Copy mode After specifying the mode to use in, insert the disc into the drive or drag the ISO file to DVDFab to start parsing the disc.
When the disc is recognized, information such as title, data size, audio, and subtitles is displayed.
The loaded source is task It is added as, and you can enable / disable the task with the button on the far right.
Meta information
If the cover art is not displayed or a different cover art is displayed in the environment where the use of meta information is enabled, correct it.
Click "Search Movies / TV Shows" to make corrections.
Disc type After selecting the content type with, title Enter the title in the item of Years Leaves blank Search Products Click, select the relevant title from the search results, click "Confirm", and meta information such as cover art will be displayed, so reflect it in "Output".
Copy guard information
The copy guard used for the disc is displayed under the title. 情报 You can check with.
protection is removed If you copy a disc with the corresponding item with the copy guard that cancels the item described as, the copyright law Avoiding technical safeguards Conflict with.
Copy mode
In copy mode Full disk-Main movie -segmentation-Combine-Customization-clone There are three types of full-disc main movie clones that are used for normal copying.
Copy the entire contents of the disc and write it to a blank disc, or output it as an ISO image file or BD folder.
Main movie
Only the main part is copied, excluding the menus and bonus videos recorded on the disc.
Customization
You can freely set the output without the restrictions on full discs and main movies.
Clone / writing
A lossless copy that produces exactly the same as the source, supporting direct writing to blank discs or output to an ISO file.
segmentation
PieceThe data recorded on a double-sided (DVD 2) DVD is divided into a single-sided single-layer (DVD 9) disc, one disc with the main title, and a disc with other titles.
Combine
Multiple discs can be combined into a single disc and automatically transcoded if the source data size is larger than the target disc size.
Main movie
The main movie is Main story Is automatically selected, but if you want to output a title other than the main part such as a bonus video, change the selected title.
To change the output title Select another title Select the title to output from.
Chapter selection
Main movie -Customization-Combine In this mode, you can specify the chapters to record.
If you want to output only any chapter, specify the chapter range after setting the title.
Transcoding (compression)
Transcoding is the process of adjusting the video bit rate to the target size, and the higher the compression ratio, the more likely it is that block noise will occur in situations where image quality deteriorates or there is a lot of movement.
DVD 5: Single-sided single-layer DVD -R (1 GB)
The copy settings of the imported DVD are displayed under the title,to DVD 5 Is transcoded (compressed) to fit on a single-sided, single-layer, 1 GB DVD-R. to DVD 5 The compression size and compression ratio are displayed to the right of.
From the list of disc sizes when writing to a single-sided dual-layer 2 GB DVD-R DL disk 9 choose.
Subtitles / audio
In the main movie, customize, split, and combine modes, you can select the audio / subtitles to record.
"▶" in front of the check box is the default audio, so specify it in consideration of the combination with subtitles.
Advanced Setting
Volume label and menu operations Advanced Setting Can be set with.
navigationIt is possible to change the menu operation when setting the DVD.
task
Since tasks are added automatically, there are cases where tasks that were interrupted due to an error are registered. Current task All the tasks added to are executed even if the check box is not checked, so it is recommended to check before executing the output processing.
The number of tasks to perform Task list Since it is displayed in, click the task list if unnecessary tasks have been added.
If unnecessary tasks are registered, enable the check box and click "Delete".
The deleted task is Garbage can Click to display the list in the lower pane, and click the arrow at the right end of the task to restore it.
Archive Tasks that failed to be processed are automatically added to, so select them if you do not need them and click "Delete".
Write to blank disc
When writing to a disc, DVDFab saves the data in a temporary folder and writes the saved data using the writing function.
Output destination After specifying the optical drive from the list and setting the number of copies, click "Start".
When the copy process is complete, the drive tray opens automatically and a dialog is displayed asking you to insert a blank disc.
ISO image file/DVD folder output
If you want to save the data on your PC with an ISO image file or DVD folder Output destination To the right of ISO image file or sending us a message on folder Select the output format with the icon and specify the save destination.
Click the save format icon, specify the save location, and then click "Start".
DVDFab Mini
DVDFab Mini The additional function has been removed Copy とRipping An app that specializes in.
Since the explanation is displayed at startup Do not redisplayCheck the box and click "OK".
What can be used with DVD copy Copy Only after selecting the copy mode from full disk / main movie and deciding the output size Destination You can copy the DVD by specifying and clicking "Start".
DVDFab DVD Copy Purchasing Procedure
DVDFab DVD Copy has no license expiration date and can be permanently updated Indefinite edition And the license has an expiration dateSubscription version Is provided and the subscription version will be automatically renewed Cancellation procedureIf you do not, you will be billed regularly.
To purchase a license, go to "Buy Now" on the product page.
Click "Buy Now" in the plan you want to purchase to proceed with the purchase procedure.
Latest sale information and purchasing method ・ Cancellation of subscriptionSee the page below
DVDFab Sale Info Latest Sale Information and How to Buy
DVDFab sale information and purchase procedure ・ Introducing license registration method DVDFab can remove the copy guard developed by DVDFab Software (formerly Fengtao Software) in China […]
Related article
Install and use StreamFab for Android
Download Amazon Prime Video and Netflix content on your Android device StreamFab for Android is a Chinese software vendor DVDFab Software (formerly […]
Install and use StreamFab All-in-One
Download videos from video streaming services and video sites StreamFab All-in-One was developed by Chinese software vendor DVDFab Software (formerly Fengtao Software) […]
DVDFab Sale Info Latest Sale Information and How to Buy
DVDFab sale information and purchase procedure ・ Introducing license registration method DVDFab can remove the copy guard developed by DVDFab Software (formerly Fengtao Software) in China […]
Installing and using DVDFab Passkey for DVD / Blu-ray
DVDFab PassKey, a DVD/Blu-ray protection removal tool for DVDFab that also supports CPRM, is a copy guard developed by Chinese software vendor Fengtao Software […]
Installing and using DVDFab All-in-One
DVDFab's strongest ripping / copying app with DVD / Blu-ray deprotection function DVDFab All-in-One is a Chinese software vendor DVDFab Software (formerly Fengtao […]]
日本語
English
Deutsch
Français
Español
Русский